Compact Fuel Polisher

KTI Systems has introduced a new line of compact FilterBoss fuel polishing modules (FPM) designed to fit into tight engine compartments and other small onboard spaces.
Author:
Publish date:
Updated on

KTI Systems has introduced a new line of compact FilterBoss fuel polishing modules (FPM) designed to fit into tight engine compartments and other small onboard spaces. FilterBoss FPMs have a small enough footprint that many boat owners will now be able to install a filtration system into spaces where doing so would have previously been impossible.

Fuel-polisher_0

Experience has shown that by eliminating fuel contamination through fuel policy, you also eliminate the number one cause of engine problems.

FilterBoss FPM’s use Racor marine filters, which are specifically designed for the harsh marine environment and readily available when replacement filters are needed. KTI’s programmable FPM-A models are available in either 90 gph or 180 gph configurations, and include an automatic shut-off feature that detects filter clogs or water in the filter to stop the filtration process before it contaminates the remaining fuel supply.

KTI’s FPM models are available in 60, 90 and 180 gph sizes and offer complete fuel polishing benefits without the programmable or auto shut-off features. For more on FilterBoss fuel polishing, click here.

Related

101218BTSC-9887

Just Launched: Little Big Boat

Peter Nielsen looks at Beneteau’s latest entry-level boat and a new cruiser from Tartan Group Beneteau’s commitment to entry-level boats has been reaffirmed over the last year with the assimilation of the sporty Seascape line of pocket cruisers and the ...read more

TOTW_PromoSite

SAIL's Tip of the Week

Presented by Vetus-Maxwell. Got a tip? Send it to sailmail@sailmagazine.com No chafe, safe stay  If you’re leaving the boat unattended for a longish period, there’s a lot to be said for cow-hitching the shorelines, as this sailor did. They’ll never let go, and so long as the ...read more

belize600x

Charter Special: Belize

It would be hard to imagine a more secure spot than the Sunsail base on the outskirts of the beachside community of Placencia, Belize. The entire marina is protected by a robust seawall with a channel scarcely a few boatlengths across. It’s also located far enough up Placencia ...read more

DSC00247

DIY: a Top-to-Bottom Refit

I found my sailing “dream boat” in the spring of 1979 while racing on Lake St. Clair in Michigan. Everyone had heard about the hot new boat in town, and we were anxiously awaiting the appearance of this new Pearson 40. She made it to the starting line just before the race ...read more

01-oysteryachts-regattas-loropiana2016_063

Light-air Sails and How to Handle Them

In the second of a two-part series on light-air sails, Rupert Holmes looks at how today’s furling gear has revolutionized sail handling off the wind. Read part 1 here. It’s easy to look at long-distance racing yachts of 60ft and above with multiple downwind sails set on roller ...read more

HanseCharles

Video Tour: Hanse 348

“It’s a smaller-size Hanse cruiser, but with some big-boat features,” says SAIL’s Cruising Editor, Charles J. Doane. At last fall’s Annapolis Boat Show, Doane had a chance to take a close look at the new Hanse 348. Some of the boat’s highlights include under-deck galleries for ...read more

amalfitown

Charter Destination: Amalfi Coast

Prego! Weeks after returning from our Italian flotilla trip last summer, I was still feeling the relaxed atmosphere of the Amalfi Coast. It’s a Mediterranean paradise, with crystal-clear waters, charming hillside towns and cliffside villages, plenty of delicious food and wine, ...read more

image005

Inside or Outside When Sailing the ICW

Last April, my wife, Marjorie, and I decided to take our Tartan 4100, Meri, north to Maryland from her winter home in Hobe Sound, Florida. This, in turn, meant deciding whether to stay in the “Ditch” for the duration or go offshore part of the way. Although we had both been ...read more