Spinnaker Savvy - Sail Magazine

Spinnaker Savvy

David von Fruke of Ssen, Minnesota, asks: "Last year I purchased a 202 ft2 asymmetrical spinnaker for my Hunter 170 along with a sock for dousing the sail. My goal is to set the spinnaker singlehanded, and while I can manage it, I do have trouble raising and lowering the sail. I have been thinking about putting the spinnaker on a roller furler. What do you
Author:
Publish date:
Social count:
0
SavvyPhoto1

David von Fruke of Ssen, Minnesota, asks:

"Last year I purchased a 202 ft2 asymmetrical spinnaker for my Hunter 170 along with a sock for dousing the sail. My goal is to set the spinnaker singlehanded, and while I can manage it, I do have trouble raising and lowering the sail. I have been thinking about putting the spinnaker on a roller furler. What do you think?"

Win Fowler replies:

I don’t think you should convert this sail to roller furling. Rather you should set the boat up so you can leave the tiller for a few moments while you are raising or lowering it. This can be as simple as stretching a piece of shock cord across the cockpit, or you can get a tiller autopilot. Whatever system you use, it will make your singlehanding simpler, safer and more enjoyable.

Since the sail is not very large, you should be able to set and douse it easily in the lee of the mainsail. This will keep the spinnaker quiet when you are hoisting or lowering it. Rig a tack line and mount a block on the stem or sprit so you can pull the tack of the sail out to the block and also release it without leaving the cockpit.

To set the spinnaker, first head off onto a broad reach, ease the main and engage your tiller minder. Next attach the tack line, halyard and sheets to their respective corners of the spinnaker, which should be to leeward between the mast and shrouds. Pull the tack out to the block, hoist the halyard and secure it. With the spinnaker sheet in your hand, slowly head up until the sail fills and then roll up the jib. If you are using two sheets, make sure the lazy sheet (the one not in use on the weather side) is led between the sail and the headstay; to be sure always attach the halyard to the head of the sail in front of the sheets. When the lazy sheet is lead this way it can’t fall under the boat. To gybe pull the leech of the sail across the boat behind its luff. Just like a jib.

To lower the sail, bear off onto a deep reach and ease out the mainsail. Unroll the jib, sheet it in position and then pull in the spinnaker sheet until the leech is in tight against the leeward side of the mainsail. When it collapses, ease the tack line and gather the foot of the sail behind the main. Finally, release the halyard and collect the sail under the boom. If you are having trouble grabbing the foot, a retrieval line attached to the spinnaker tack will help you get it back in the boat. The only drawback to this arrangement is that you do have to lower the sail on the same gybe as you did when you set it. Practice these maneuvers in light air and before long you will be able to set and douse the sail easily and quickly.

Related

180615-01 Lead

A Dramatic Comeback in the Volvo

After winning three of the last four legs in the Volvo Ocean Race (and coming in second in the fourth), Dutch-flagged Brunel is now tied for first overall with Spanish-flagged Mapfre and Chinese-flagged Dongfeng following the completion of Leg 10 from Cardiff, Wales, to ...read more

MFS-5-2018-Propan-SP02

Tohatsu LPG-powered 5hp Propane Motor

Gassing it UpTired of ethanol-induced fuel issues? Say goodbye to gasoline. Japanese outboard maker Tohatsu has introduced an LPG-powered 5hp kicker that hooks up to a propane tank for hours of stress-free running. Available in short-, long- or ultra-long-shaft versions, the ...read more

TOTW_PromoSite

SAIL's Tip of the Week

Presented by Vetus-Maxwell.Got a tip? Send it to sailmail@sailmagazine.comThink Deeply When chartering, I am always maddened to be told that the echo sounder is calibrated “to depth under the keel, plus a bit for safety.” Such operators seem to imagine that the instrument’s sole ...read more

180612-01 Landing lead

Painful Sailing in Volvo Leg 10

It’s looking to be a case of feast or famine for the 2017-18 Volvo Ocean fleet as it continues the epic struggle that has been Leg 10, with it having been all famine thus far. Painful is the only word to describe the light-air start in Cardiff, Wales, on June 10, as the 11-boat ...read more

01-13_07_180304_JRE_03695_4605

Tips From the Boatyard

Within the Volvo Ocean Race Boatyard sits a communal sail loft which provides service and repairs for all seven teams sailing in the 2017-18 edition of the race. The sail loft employs only five sailmakers who look after 56 sails in each stopover. If you’re thinking, “wow, these ...read more

sailCarwBasicsJuly18

Sail Care for Cruisers

Taking care of your canvas doesn’t just save you money, it’s central to good seamanship  Knowing how to take care of your sails and how to repair them while at sea is an important part of overall seamanship. The last thing any sailor needs is to get caught on a lee shore with ...read more

Ship-container-2048

The Danger of a Collision Offshore

This almost happened to me once. I was sailing singlehanded between Bermuda and St. Martin one fall, and one night happened to be on deck looking around at just the right time. The moon was out, the sky was clear and visibility was good. Still, when I thought I saw a large ...read more

New-MHS-Promo

Multihulls on the Horizon

Fountaine Pajot New 42The French cat powerhouse has been on a roll these last few years, cranking out new models that not only replace their older line but take a step forward in design and user-friendliness. The New 42’s “real” name had not been revealed as we went to press, but ...read more