PxPixel
Mast lines - Sail Magazine

Mast lines

"I’m building a 42-foot cutter that I hope to launch this year, and my present sailplan is a fractional rig with running backstays. I plan to use a carbon-fiber mast, but I want to do away with the runners. Can a rigger redesign the standing rigging—particularly the chainplate locations—or will I have to redo the whole sailplan? And if that’s what’s required, where should I go to get a new
Author:
Publish date:

"I’m building a 42-foot cutter that I hope to launch this year, and my present sailplan is a fractional rig with running backstays. I plan to use a carbon-fiber mast, but I want to do away with the runners. Can a rigger redesign the standing rigging—particularly the chainplate locations—or will I have to redo the whole sailplan? And if that’s what’s required, where should I go to get a new one?"

-- Frank Partridge, Everglades City, Florida

Win Fowler replies: Installing swept-back spreaders and moving the chainplates aft might let you avoid having to use running backstays. But if you want to be sure this is going to work, you should have a naval architect who specializes in sailboat design reconfigure the rig without runners. If you don’t know any architects in your area, your spar maker should be able to give you several recommendations.

Related

3DiNordac_webheader

3Di NORDAC: One Year In

One year ago this month, North Sails launched a cruising revolution with the introduction of 3Di NORDAC. The product promised to deliver a better cruising experience for a market that had not seen true product innovation in over 60 years. Today we’re celebrating the team that ...read more

HB96k_EP

Sea Eagle’s HB96 inflatable SUP

What SUP?Dinghies and kayaks are all very well, but there’s nothing like a stand-up paddleboard for exploring interesting new shorelines while giving you a good workout. Sea Eagle’s HB96 inflatable SUP makes a fine addition to your boat’s armory of anchorage toys, either on its ...read more

DSC_0031-43

Charting the USVI and Spanish Virgins

When my friends and I booked a one-way bareboat charter with Sail Caribe, starting in the U.S. Virgin Islands and finishing in Puerto Rico, we were a little nervous about what we would find in the aftermath of hurricanes Irma and Maria—even seven months later.When our plane ...read more

SailRepairKit

Know How: Sail Repair Kit

Despite your best efforts, there will inevitably be times when your sail gets damaged while at sea and needs to be repaired. First, no matter what the job, you will need to do a quick damage assessment, a task that requires a flat wooden surface, sharp scissors and a helping ...read more

01-061018ROAC-8149

Coming of Age at the Atlantic Cup

Midway through the final race of the inshore portion of the 2018 Atlantic Cup, the three boats in the lead—Mike Dreese’s Toothface 2, Mike Hennessy’s Dragon and Oakcliff Racing, representing the Long Island Sound-based sailing school of the same name—suddenly broke free from the ...read more

01_silken_2018-03-08-0052

North U’s Regatta Experience Program

“Want to check the keel?” North U Coach Geoff Becker calls to me from back by the transom. We’ve just suffered our worst finish in the regatta and are absolutely flying on our way back to shore, spinnaker up and heeling at an angle that feels like maybe we’re tempting fate. ...read more

Navy-Sand-Dune_1080

Tucket Footwear’s Giller Shoes

Just for KicksMove over Crocs, there’s a new plastic shoe in town. Unlike the aforementioned fashion crimes, Tucket Footwear’s Giller shoes are made for boating. Water will get in, yes, but it will also run straight out again via rows of “scuppers” in the uppers and a dozen drain ...read more

01-m3113_git170829-294

France’s Maxi-tri Ultime class

It’s hard to believe how far foiling has come since the Moth class figured out how to reliably take to the air in the early 2000s.Was it really only in 2013 that the America’s Cup was dragged kicking and screaming into the foiling world by Emirates Team New Zealand back in San ...read more