Deck makeover Page 2

As part of the refit of our project boat, Ostara, a 1973 Norlin 34, I decided to scrap its vintage hydraulic system for tensioning the backstay, boomvang, and babystay, along with the control panel in the cockpit. In its new role as a coastal cruiser and occasional racer, the boat had no need for such powerful trimming gear or for hoses full of hydraulic oil leading
Author:
Publish date:
dings_chipped_gelcoat
two-part_polyurethanes

End result

undercoat_brush
flattening_agent

Nearly two years later, the Perfection still looks great. I’m glad I used the flattening agent; the paint also cured with a slight eggshell finish, which further cuts down on reflected glare. The paint has been bashed with winch handles, scraped with anchor chains, and walked on in street shoes, and shows no sign of abuse. Professionals armed with spray guns would have done a better job, but the cost would have been dramatically higher.

two-part_paint_application
thinning_paint

Related

IslandPacket349

Boat Review: Island Packet 349

After years of quiescence in the wake of the Great Recession, iconic Island Packet is back with its new 349, a re-boot of the old Estero that not only looks great, but takes the Island Packet style of sailing performance to a new level. Design & Construction First among the many ...read more

190219NEEL51

Video Tour: Neel 51 Trimaran

At this past fall’s Annapolis Boat Show, SAIL magazine had a chance to corner Neel Trimarans founder Eric Bruneel and have him give us a tour of the accommodations aboard the new Neel 51, winner of the “Multihull over 50ft” category in the 2019 Best Boats contest. For a complete ...read more

IMG_0173

Electronic “Flares” for Cruisers

The United States Coast Guard requires that all boats operating in coastal waters or on the high seas carry a selection of visual distress signals. Almost invariably, such signals include the pyrotechnic type, either handheld or fired from a flare pistol, but surely there are ...read more

M2-HOOK-TOP-AND-CHAIN-1

Gear: M2 Chain Hook from Mantus

Stay Hooked Chain hooks on anchor snubber lines tend to fall off when you least want them to. Not so this latest example from Mantus. The M2 Chain Hook is secured to the chain by a simple elastic strap, so it won’t come off when the snubber loosens. Made from corrosion-resistant ...read more

shutterstock_349918991

Successful Surf Landings with Wheels

“Ready to take the dink ashore?” Never had those words invoked as much anxiety as when my husband, Jeff, and I first moved to the Pacific Coast. Why? Because we had exactly zero experience with dinghy surf landings, and the possibility of being flipped upside down along with our ...read more