No More Cotter Pins

Standing at the bow of Eurisko, our Creekmore 34, my heel always scrapes the turnbuckle for the cutter stay when I operate the windlass. For many years I inevitably returned to the cockpit after setting the anchor with a bloody foot where the cotter pin had gouged me.
Author:
Publish date:
Updated on
cutter-stay

Standing at the bow of Eurisko, our Creekmore 34, my heel always scrapes the turnbuckle for the cutter stay when I operate the windlass. For many years I inevitably returned to the cockpit after setting the anchor with a bloody foot where the cotter pin had gouged me. Though my husband, Dave, tried to bend the offending pin out of the way, it wasn’t until we rerigged the boat that he thought up a permanent solution.

Working on customer’s boats, Dave had seen cotter pins that were turned and twisted by turnbuckles until they broke. So when it came time to buy cotter pins when we rerigged our boat, he balked. Instead he bought a spool of seizing wire.

Typically used to mouse shackles (as on anchors), seizing wire is a great substitute for cotter pins. The wire cannot twist or bend; there are no loose ends to snag sails, lines and feet; and the rig looks “finished.” The turnbuckle can’t turn without the wire first breaking, which isn’t likely to happen. Both my foot and I appreciate the improvement.

Photo by Connie McBride

Related

TOTW_PromoSite

SAIL's Tip of the Week

Presented by Vetus-Maxwell. Got a tip? Send it to sailmail@sailmagazine.com No chafe, safe stay  If you’re leaving the boat unattended for a longish period, there’s a lot to be said for cow-hitching the shorelines, as this sailor did. They’ll never let go, and so long as the ...read more

belize600x

Charter Special: Belize

It would be hard to imagine a more secure spot than the Sunsail base on the outskirts of the beachside community of Placencia, Belize. The entire marina is protected by a robust seawall with a channel scarcely a few boatlengths across. It’s also located far enough up Placencia ...read more

DSC00247

DIY: a Top-to-Bottom Refit

I found my sailing “dream boat” in the spring of 1979 while racing on Lake St. Clair in Michigan. Everyone had heard about the hot new boat in town, and we were anxiously awaiting the appearance of this new Pearson 40. She made it to the starting line just before the race ...read more

01-oysteryachts-regattas-loropiana2016_063

Light-air Sails and How to Handle Them

In the second of a two-part series on light-air sails, Rupert Holmes looks at how today’s furling gear has revolutionized sail handling off the wind. Read part 1 here. It’s easy to look at long-distance racing yachts of 60ft and above with multiple downwind sails set on roller ...read more

HanseCharles

Video Tour: Hanse 348

“It’s a smaller-size Hanse cruiser, but with some big-boat features,” says SAIL’s Cruising Editor, Charles J. Doane. At last fall’s Annapolis Boat Show, Doane had a chance to take a close look at the new Hanse 348. Some of the boat’s highlights include under-deck galleries for ...read more

amalfitown

Charter Destination: Amalfi Coast

Prego! Weeks after returning from our Italian flotilla trip last summer, I was still feeling the relaxed atmosphere of the Amalfi Coast. It’s a Mediterranean paradise, with crystal-clear waters, charming hillside towns and cliffside villages, plenty of delicious food and wine, ...read more

image005

Inside or Outside When Sailing the ICW

Last April, my wife, Marjorie, and I decided to take our Tartan 4100, Meri, north to Maryland from her winter home in Hobe Sound, Florida. This, in turn, meant deciding whether to stay in the “Ditch” for the duration or go offshore part of the way. Although we had both been ...read more

MK1_30542

SailGP: There’s a New Sailing Series in Town

San Francisco was the venue of the biggest come-from-behind victory in the history of the America’s Cup when Oracle Team USA beat Emirates Team New Zealand in 2013, so it seems only fitting that the first American round of Larry Ellison’s new SailGP pro sailing series will be ...read more