Boat Review: Beneteau Oceanis 51.1

Author:
Publish date:
Three versions for ultimate flexibility

Three versions for ultimate flexibility

French boatbuilder, Groupe Beneteau, never introduces just one new idea. Instead, it likes to package concepts together and give them different names, so that when a new model is launched, owners can choose the combination that works best for them.

With the introduction of the Oceanis 51.1 (the fifth model in the “.1” line that will replace the Oceanis 48) Beneteau once again brings three different flavors to market for the racer (First), cruiser (Comfort) and daysailer (Easy). This targets three kinds of buyers with one hull design and adds flexibility that makes everyone feel catered to and special. No wonder Beneteau’s catchphrase is, “There’s an option for that.”

Design & Construction

The three iterations share the same hull but come with different interiors and rigging. The “Easy” daysailer comes with a self-tacking jib, in-mast furling for the mainsail and a minimum of winches to manage lines. The “Comfort” cruiser adds an internal D1 lower shroud, two more Harken winches, an arch for the mainsheet attachment point, sun beds on either side of the companionway and an outdoor grill. Finally, the “First” racing version packs an additional 35 percent of sail area, set on either a carbon fiber or aluminum spar, and a 9ft 2in keel with a bulb. With this performance package, winches and deck hardware are also upgraded, and a hydraulic backstay and composite wheels are added.

All three versions share a hull that includes a chine over a third of its length. Standard draft is 7ft 7in, with a shoal-draft keel available drawing 6ft 1in, in addition to the aforementioned performance keel.

On Deck

The first design to be launched under Beneteau’s new marketing director, Gianguido Girotti, the Oceanis 51.1 is all about attention to detail, with clever surprises all around: hinge-up foot braces at the helms work well when heeling but don’t create toe-stubbers when not in use; lifelines have been raised a few inches as they should be on a distance cruiser; and the large aft lazarette has plenty of room for fenders, lines and a Fischer Panda genset that has good access all around. The cockpit table is massive with excellent handholds, liferaft stowage at the aft end and a refrigerator at the other. In between is a wooden tray insert that can be loaded up with drinks and snacks in the galley and brought to the cockpit, where it will stay in place even underway.

An array of six Spinlock sheet stoppers manage the lines on either side of the cockpit, and the winches are positioned so that grinders face forward and can see the sails. The composite sprit takes the anchor well away from the plumb bow and provides an attachment point for a Code 0. It also naturally elongates the hull, which is a nice aesthetic, although I would like to see the small navigation lights moved off the deck and higher up on the bow pulpit where they will be more visible from a distance.

One thing in need of change is the placement of the deck fills. On the port-side, the water and waste fills are only about 4in apart and regardless of how careful one is, the possibility of contamination of the water tanks is high.

Another head-scratcher is the size of the helm consoles—they’re tiny. Not only do they look completely out of proportion compared to the substantial cockpit table, but they can only accommodate a 9in B&G MFD and little else. The engine throttle, wind instrument repeater, windlass remote panel and bow thruster control are all by your ankles at the starboard wheel. Not only do you need to bend down to operate the thruster and engine, taking your eyes off the bow just as you are docking, but it’s easy to accidentally activate the thruster as we did three times on our test sail.

That said, lounging spaces abound with two on either side of the companionway and a large sun pad on the bow. Another clever option is a grill that swings out from the aft bench so the chef can stand on the electric swim platform to cook. Beneteau has also brought over the optional hideaway dinghy davits from its powerboat line. They retract completely out of the way when not in use so as not to impinge on the boat’s sleek profile.

The saloon looks especially light with the new “brushed oak” finish

The saloon looks especially light with the new “brushed oak” finish

Accommodations

Layout options include up to five cabins and four heads (if you count the crew quarters in the forepeak). Our test boat had three cabins and two heads with the master stateroom and its split shower/head compartments forward. The interior is very airy due to multiple overhead hatches in the saloon and master stateroom and hull ports throughout. A new finish called “brushed oak” adds simulated wood grain texture for a richer look. Mahogany is the other option.

The galley is C-shaped and to port with a two-burner Eno stove, Vitrifrigo drawer refrigeration and soft-close drawers for plenty of stowage space. The galley provides good brace points so it won’t be a struggle to prep meals even on a port tack.

The nav station is large and up against the forward saloon bulkhead. Its seat also makes a sideways lounge with a pop-up feature in the middle to support your legs. This neat little feature will probably make it the favorite seat in the house. The companionway should win an award for its large, easy steps and good railings on either side.

Under Sail

Due to their cored construction and easy rigs, Beneteaus generally sail well in light air and with little effort, so I was looking forward to our test on the Chesapeake. Sadly, we were met with little to no wind. At one point, though, 6.4 knots of apparent wind materialized over the deck, and on a beam reach with flat water, we accelerated to nearly 5 knots, which tells me that this is a capable design.

Our upgraded Elvstrøm laminate sails sheeted in flat as pancakes. For all but the racing crowd, a self-tacking jib and Code 0 will be the best rig combination.

Under Power

With just over 30,000lb of displacement, the boat’s 80hp Yanmar with saildrive has plenty of power. Our test boat had the upgraded 100hp diesel, and in the calm conditions, we maxed out at 3,400 rpm and 10.1 knots. A fast cruise was 9.7 knots at 2,500 rpm, and even at 1,000 rpm we motored at 6.1 knots. Standard tankage is only 53 gal, which is not much for a cruiser. However, there’s an option to double that with an additional tank. Standard freshwater tankage is 116 gal, but another 87 can be added for a total of 203, which is respectable even for distance cruising.

Beneteau’s joystick drive Dock & Go, which ties together the engine, thruster and autopilot, is an option.

Conclusion

With four different interior layouts, five rigging plans, three keel types and a choice of 150 available options for 700 possible combinations, the 51.1 lives up to Beneteau’s approach to flexibility. There truly is an option for everything. 

BeneteauSailPlan

Specifications

LOA 52ft 4in LWL 47ft 8in Beam 15ft 9in

Draft 6ft 4in (shoal); 7ft 9in (deep); 9ft 5in (performance)

Displacement 30,702lb

Ballast 7,943lb (shoal); 7,485lb (deep); 7,048lb (performance)

Sail Area 1,011ft

Air draft 70ft 1in (standard)

Fuel/Water (GAL) 53/116

Ballast Ratio 24 SA/D Ratio 17 D/L Ratio 127

Engine 80hp Yanmar with saildrive

What do these ratios mean? Visit sailmagazine.com/ratios

Designer Berret-Racoupeau

Builder Beneteau, S. Gilles-Croix-de-Vie, France

U.S. Distributor Beneteau America, Annapolis, MD, 410-990-0270, beneteau.com/us

Price $412,600 (base) at time of publication

February 2018

Related

MHS-GMR_3549

New Multihulls 2018

Farrier F-22 New Zealander Ian Farrier ushered in a new genre of sailing with his folding-ama trailerable trimarans, the best-known of which are the Corsair designs. Farrier’s last project before he passed away last year was this sweet little tri. Available in three versions, ...read more

shutterstock_373701682

Cruising: Island Comeback

The U.S. Virgins Islands have surged back from the devastation of the 2017 hurricanes, with new infrastructure plans that will benefit charterers and cruisers alike. After hurricanes Irma and Maria roared through the Leeward Islands in September 2017, it was impossible to ...read more

albintoilet

Gear: Albin Pump Marine Toilet

Head Start Is there room for a new marine toilet? Albin Pump Marine thinks so, having just introduced its line of Swedish-built heads—ranging from compact to full-size models—to the American market. The toilets feature vitreous porcelain bowls and either wooden or thermoplastic ...read more

07n_45R2699

Multihull Sailor: Classic Cats

If you’re looking for a decent sub-40ft cruising cat, you have few choices when it comes to new-boat offerings. It is a well-known fact that the multihull market has taken off in a way very few could have predicted. Despite Hurricane Irma’s recent destruction of a large part of ...read more

TOTW_PromoSite

SAIL's Tip of the Week

Presented by Vetus-Maxwell. Got a tip? Send it to sailmail@sailmagazine.com Thanks a bunch  This scene is very calm and seamanlike. No frantic rope throwing or shouting. As he passes the line to the gent on the dock, the crew on the boat says, quietly and clearly, “Would you ...read more

mcarthy-and-mouse

Experience: McCarthy and the Mouse

Sitting at the helm in a light breeze, my arms crusted with a fine rime of salt, my skin so dry I’d lost my fingerprints, I heard a clatter and a curse from below. There were only three of us a thousand miles from shore and only one on watch at a time. Usually, the off watch lay ...read more