Sails

Powering Up

by Win Fowler, Posted October 20, 2008

"The mainsheet traveler on my boat is mounted on a bridgedeck at the forward end of the cockpit with the mainsheet itself running through a six-part tackle from the traveler up to the end of the boom. The mainsail is about 350 square feet. I’d like to run the mainsheet back to a winch near the helm. How should I proceed?"

 

-- Robert Elder , New York, New York

Win


FULL STORY
Boatworks

Loud and clear

by Gordon West, Posted October 20, 2008
How much VHF signal strength will I lose if I put a coaxial cable disconnect assembly at the base of my mast? I want to eliminate the hassle of having to pull out the cable every time I step or unstep the mast, and this seems like a good solution.

-- Dennis Thompson , Annapolis, Maryland

Gordon West replies : If you can be sure the coax disconnect assembly


FULL STORY
Boatworks

Cedar Ceiling

by Don Casey, Posted October 20, 2008
"I’ve taken out the cabin liner on my 1984 Beneteau 35 and have wire-brushed the glass surface underneath and painted it with EZPoxy. I now want to line the side walls with cedar paneling. How would you prep the painted glass surface, and what adhesive do you recommend?"

-- Charlie Wetherill , Bayfield, Wisconsin

Don Casey replies : Many lockers that contain


FULL STORY
South America

Ceviche and Process Knitting

by Clark Beek, Posted September 24, 2008
I heard various comments about Peru from other sailors as I cruised South America, usually to the effect of “Don’t even go near the coast. Stay at least fifty miles off.” These rumors undoubtedly date back to the 1980s heyday of Peru’s dictatorships and the Shining Path guerillas; Peru is now in fact a pretty tame place. Moreover, it has 1,500 miles of coastline, several key New World
FULL STORY
Boatworks

Curious Zincs

by Nigel Calder, Posted September 22, 2008
"I’ve had my boat, which has a Volvo Penta saildrive engine, for eight years. For the first six years, when I hauled the boat for annual maintenance I found the zinc anode on the saildrive was slightly eroded but was still firmly attached. I changed the zinc annually.

However, when I hauled the boat two years ago, I found the anode was loose and the erosion had occurred primarily around the


FULL STORY

Abu Dhabi Ocean Racing’s Adil Khalid on his Second VOR

Facnor's flat deck furler on a J/111

image description
  • facebook
  • twitter