"My local marine-electronics dealer tells me that marine SSB and ham radio are outdated and that I should use a satellite phone. What do you think?"
Gordon West replies:
There’s no question that a sat phone is a very handy device. But the advantage of radio is that since SSB signals bounce off the
David Meyers of Kaysville, Utah, asks:
"I’m refurbishing my Ericson 30 this winter and am about to remove a light layer of rust that has accumulated on the boat’s stainless-steel rigging. What do you recommend for this sort of rust removal? Most of the rigging is in good shape, but it has lost its shine. I’ve heard of using an electrolytic process, but I don’t want to
"The metal and Lexan hatches on our Slocum cutter are leaking. I’ve tried a BoatLife sealant and 3M’s 4200, but without success. What kind of sealant will stop the leaks?"
Don Casey replies:
BoatLife shouldn’t be used with Lexan because the polysulfide and solvents it contains will leach out the plasticizers
"The two zincs on my prop shaft were eroding quickly last summer, so I hung a zinc guppy over the side and attached it to the backstay. I measured the current between the backstay and the guppy with my multimeter, which read between .04 and .07 amp of current with all battery connections removed. Where is this current coming
Abu Dhabi Ocean Racing’s Adil Khalid on his Second VOR