by Steve Henkind, Posted November 20, 2008Chartplotters are powerful extensions of GPS technology and provide tremendous convenience, but they can get you into trouble if you’re not careful. While my focus is on vector-based plotters (digitized charts, which are the ones typically found on recreational sailboats), most of my observations also apply to raster-based (scanned charts) plotters.Scale change matters.
by Richard Woods, Posted August 26, 2008Follow these performance tips to get the most from your cruising cat.By Richard WoodsI’ve been sailing and designing catamarans since 1976. I’ve cruised tens of thousands of miles and have won several national titles in racing boats. Years of experience have taught me how to maximize sailing performance. For starters, nothing turns a cruising cat’s polar potential
by Sail Staff, Posted August 21, 2008When our wind generator stopped spinning in Fiji, we wanted to have parts sent to us by the manufacturer. Then several friends told us they were having trouble getting gear sent from overseas; the problems ran from having packages stopped in customs to shipments that never even showed up. So instead of having our purchases mailed directly to us at our marina, we asked a local chandlery that
by Niels R. Jensen, Posted August 21, 2008Spilled diesel fuel leaves an unpleasant odor that can nauseate some people, especially if they have to be down below in heavy weather. It’s tough to get rid of the odor once it takes hold. When the diesel in the fuel tank aboard Freelance, my Pearson 36 cutter, became contaminated, my fuel filters clogged and disabled the engine. I changed the primary and secondary filters and bled the
by Charles Mason, Posted August 21, 2008SailsBecoming a good helmsman is similar to becoming a skilled driver or pilot. In all three cases the best operators follow a routine that lets them continuously check many variables: the outside environment—the road, the airspace around them—the navigation instruments, and other important inputs, such as how much "pull" the machine might have when it goes into a
by Ann Hoffner, Posted August 21, 2008A handy technique for rereeving lost halyardsBy Ann HoffnerWith our Peterson 44, Oddly Enough, snug in a slip in Darwin, Australia, we stripped the gear off her deck before flying home for an extended visit. I bought three small bales of light polypropylene line and rigged messenger lines so I could rereeve the halyards when we returned. But I was distracted by the
by Sail Staff, Posted February 28, 2008It was a beautiful afternoon with a gentle breeze from the southeast. My wife, Catherine, and I were out for a romantic sail. What could go wrong?I was eager to set off in our recently acquired boat, Ruach, a 13.5-foot trailerable Expo Solar Sailer designed by Garry Hoyt, Ted Hood, and Everett Pearson. Cath, a first-timer, was nervous, but throwing in a picnic
by Sail Staff, Posted September 25, 2006This month: Steering toward a buoy, trip lines, a Cutter that cuts it, and how to change an impellerMaintenance A “Burned” ImpellerImpellers for the engine’s raw-water pump don’t last forever. Even if they aren’t destroyed by having been run dry following a blockage in the raw-water line, they still deteriorate over the years. If you’ve never had to change one,