Boats

Contest 65CS

by Sail Staff, Posted June 2, 2005
Contest Yachts has been building well-found cruising boats for decades. Its 50-footer is a proven passagemaker with thousands of open-sea miles under its keel. But with the trend clearly moving toward larger semi-custom designs, Contest is offering a new 65-footer that it believes will fill a niche. With a masthead rig and powerful sailplan, the yacht has been designed to perform well over a full

Briand 105

by Carlos Serra, Posted June 2, 2005
It’s a sparkling summer morning in Palma, Mallorca, and the crew of the 105-foot sloop Gliss (derived from the Dutch word glinsteren, which means to shine or glitter with brilliance) is waiting for her owner and his guests to arrive. The cook has already returned from the market with fresh produce, local bread, and freshly caught sea bass. At the appointed hour the owner’s party arrives onboard,

Hood 54-foot Motorsailer

by Sail Staff, Posted June 2, 2005
Legendary sailor and designer Ted Hood has created a larger version of his 48-foot motorsailer and is building it on a custom basis at the TeKad facility in Tuzla, Turkey. While many of the belowdecks features are similar to those of Hood’s well-known Little Harbor 54 and 60 designs, the waterline on this yacht is far longer, the freeboard is much higher, there is a flush deck, and, of course,

Athena

by Sail Staff, Posted June 2, 2005
This 298-foot classic three-masted schooner designed by Gerard Dijkstra & Partners and built at Royal Huisman in Alustar aluminum for an American client was finally sailing at the end of September. The fore-, main-, and mizzenmasts were all built in aluminum by Rondal; the topsails can be furled in the mast while all the lowers furl into carbon booms. All deck hardware was

Hallberg-Rassy 48

by Sail Staff, Posted June 2, 2005
Although based on the same concept as the German Frers–designed 46-foot bluewater cruiser that this Swedish builder has produced for many years, the HR 48 has an entirely new hull and layout. Interior space has been expanded with a longer waterline and has been brightened with larger side windows. The aft cabin is wider and is available with either two bunks on each side or

Vitters 140

by Sail Staff, Posted June 2, 2005
Last spring Vitters Shipyard launched this 140-foot aluminum sloop designed by Ed Dubois. Built to MCA standards, the yacht is a refinement of other DuBois designs in this size range. The contemporary birch interior by Dick Young Designs is exceptionally well finished. Bulkheads are brushed stainless steel with oiled- teak surrounds, and all the bathrooms have floating teak

Pendennis 157

by Sail Staff, Posted June 2, 2005
Not many yachts are as innovative as this Liebowitz & Pritchard–designed 157-foot aluminum motorsailer. Drawn by Pedrick Yacht Design, this sloop can sail well and motor at speeds of up to 23 knots; with its centerboard up, the draft is just under 7 feet, allowing it to enter anchorages normally out of bounds for yachts this size.A major design issue was how to make the higher-than-average

Maiden Hong Kong

by Sail Staff, Posted May 31, 2005
Mari-Cha IV currently rules the Atlantic, but there may be a new sheriff in town with the launching of Frank Pong's record chaser, Maiden Hong Kong. Designer Juan Kouyoumdjian's brief was for a 100-foot-plus monohull capable of breaking existing transoceanic records. Maiden's 115-foot carbon-composite hull is a stripped-out (pipe berths only) racer built by DK Yachts in

Maximus

by Charles Mason, Posted May 31, 2005
The owners of this silver-hulled sloop, Bill Buckley and Charles Brown, also believe they have built the fastest Maxi afloat and are planning to prove it when they toe the line with the present recordholder, the 141-foot ketch Mari Cha IV, Maiden Hong Kong, and a fleet of other maxis in this month's Rolex Transatlantic Challenge from New York to England.

Cookson 50

by Sail Staff, Posted May 31, 2005
The Cookson 50 from New Zealand's Cookson Boats belongs to the new generation of high-performance boats sporting canting keels and blistering speed potential. Mick Cookson, who worked with Farr Yacht Design to develop the concept, didn't start out to build a canting-keeler. "This began as a fixed-keel boat with a trim tab," he said. But Cookson also wanted a lightning-fast boat that had enough
  • facebook
  • twitter