Boats

Oyster 46

by Sail Staff, Posted January 23, 2006
Designer Rob Humphreys’s latest project in his continuing update of the Oyster line has been to take a fresh look at the 45-foot center-cockpit deck-saloon model designed for Oyster many years ago by Holman & Pye. Many of the features that have made Oyster one of the world’s preeminent builders of custom and semi-custom yachts are present on this yacht. Now Humphreys has revisited the basic hull

Briand 115

by Sail Staff, Posted January 23, 2006
Designed by Philippe Briand, with interior dcor by Andrew Winch, this 115-foot sloop is the largest composite yacht that has been built by the well-known French yard CNB. Launched in mid-May, the yacht has been built with carbon fiber and vinylester resins using a resin-infusion system. The yacht’s lifting keel has a 60,000-pound bulb that can be retracted from a maximum draft of 16 feet to a

Baltic 79

by Sail Staff, Posted January 18, 2006
Delivered to an Italian owner last year, this carbon-composite hull has a lifting keel that can reduce draft from 14 feet, 9 inches to less than 10 feet. The rig includes a new “canoe” boom that is supposed to be easier to use and store the mainsail better than the more traditional wide, flat Park Avenue boom. The nonoverlapping jib makes the yacht easy to handle, and the

Maggie B

by Sail Staff, Posted January 18, 2006
Nigel Irens, designer of Ellen MacArthur’s record-setting trimaran, B&Q, also enjoys drawing monohulls like this fast gaff-rigged centerboard schooner now being built for an experienced American sailor. “Although the yacht may appear to have been inspired by traditional designs,” says Irens, “the objective has been to create an efficient and easily maintained vessel for world cruising.”The

Shipman 63

by Sail Staff, Posted January 18, 2006
When their carbon/epoxy-hulled 50-footer was launched two years ago, it was named European Boat of the Year. But the Shipman design team has decided there is also a need for a yacht in the 60-foot range that can make offshore passages quickly and effortlessly. The result is this pilothouse design the Shipman team is calling “the racer’s ocean cruiser.” The lightweight

Sunreef 60

by Sail Staff, Posted January 18, 2006
After completing a 74-foot catamaran intended principally for luxury charters, designers Van Peteghem and Prevost were asked by Sunreef to design a smaller catamaran that would appeal to private owners. With four units—two in aluminum and two in composite laminates— already under construction at the builder’s yard in Gdansk, Poland, there is little doubt that this concept has struck a responsive

Southern Wind 100

by Sail Staff, Posted January 18, 2006
This South African yard has specialized in large composite yachts for the past 10 years. This sloop, whose lines, sailplan, keel, and rudder are from Farr Yacht Design, is their largest project to date. The composite hull construction features an infused carbon/Kevlar and epoxy laminate; with structural engineering by SP Technologies. Displacement is expected to be about 130,000

Kanter 65

by Sail Staff, Posted January 16, 2006
This 65-foot aluminum pilothouse sloop was launched at the end of May and then transited down the St. Lawrence to start an extended cruise to its home port on the west coast of Florida. The basic theme comes from Chuck Paine’s Bermuda series of designs, but there’s an emphasis on increasing interior space aboard this yacht. The key is a large pilothouse that extends over both

Friendship 53

by Sail Staff, Posted January 16, 2006
When a client wanted to replicate the exact look and idea of the Friendship 40, but in a slightly larger version with two staterooms instead of one, designer Ted Fontaine began to draw—and a big sister to the Friendship 40 was born. The exteriors of the two boats are nearly identical, with clean decks and low-profile cabintops providing a full 360-degree line of sight for the helmsman. The 53’s

Hallberg-Rassy 54

by Sail Staff, Posted January 16, 2006
Construction has begun on this new 54-foot center-cockpit design from German Frers, and the first yacht in the series is expected at the end of August. There’s an owner’s cabin aft and two guest cabins forward. Construction is glass with PVC core except in the keel area, which is solid-glass laminate. Spars and rod rigging are by Seldn, and the auxiliary is a 110-horsepower Volvo diesel. A
  • facebook
  • twitter